Jump to content


Photo
- - - - -

oem part numbers for replacement parts


  • Please log in to reply
26 replies to this topic

#1 kenfuji

kenfuji

    Nismo LM GT-2

  • Veterans
  • 5,098 posts

Posted 25 January 2004 - 08:18 PM

I've been wanting to do this for a while.
i am planning on making a list with parts with the stock oem parts. only US oem numbers for the s13/14 chassis or other oem parts that are considered oem upgrades or replacement for the ka24d sr20det , ca18det or RB25det etc. etc. Only parts that are frequently or commonly changed so we can keep it for quick refference.

IE.

tierodsleeves/Steering Boot 48203-10V25 s13/14 ka/sr
tierodsleeves/Steering Boot @pepboys FA8029 (14.99 per)
Rear Tranny Seal 32136-U0100 s13/14 ka/sr
Lower Shifter Boot 24216-V5000 s13/14 ka/sr

#2 alfred183

alfred183

    Radio Box

  • Veterans
  • 2,191 posts

Posted 25 January 2004 - 08:22 PM

from NICO http://www.nissaninf...&threadid=29573

Oxygen Sensor CA18ET 200sx Bosch 13276 $47.99
Spark Plugs CA18ET* 200sx NGK PFR6A-11 $Varies
PCV Valve CA18DE Pulsar NX Bosch PCV142 $2.99
Thermostat CA18DE Pulsar NX 491-180 $4.99
Thermo Gasket CA18DE Pulsar NX Felpro 35228 $0.89
Water Pump** CA18DE Pulsar NX B150-1350 $33.99
Upper Rad. Hose KA24DE 240SX L-564 $7.99
Lower Rad. Hose KA24DE 240SX M-563 $7.39
Oil Filter CA18DE Pulsar NX Bosch 3400 $5.49
CA18DET Alt Belt 4pk855 $9.99
CA18DET PS Belt 4pk845 $8.99
CA18DET AC Belt 4pk840 $8.99

#3 mazdog

mazdog

    have you no logic?

  • Veterans
  • 1,994 posts

Posted 25 January 2004 - 09:03 PM

ok found a few:

-Tranny rear dust shield # 32135-97L00 (needed for JDM tranny into Usdm)
-Fuel Pump cover O-ring # 17342-01A00 -s13
-Brake booster hose (3 pieces) # 47471-40F00, 47478-03B00, 47474-40F00 -s13
-Lower Engine harness # 24077-53F00 -91+ S13

-Nismo RH steering rack bushing #54444-RS520 -s13/14
-Nismo LH steering rack bushing #54445-RS520 -s13 (on my paperwork this one is not listed for S14, may be a typo??)

-Flywheel bolts #12315-2J220 -SR
-Turbo to Mani gasket #14415-17M00 -SR

-Z32 Fuel filter #16400-N7605JP -s13/14

#4 JiinKz

JiinKz

    fuck you.

  • Veterans
  • 4,692 posts

Posted 25 January 2004 - 09:10 PM

SR AC/PS Belt - 4pk870

#5 kenfuji

kenfuji

    Nismo LM GT-2

  • Veterans
  • 5,098 posts

Posted 24 February 2004 - 08:09 PM

rear main seal(sr20det) - 12279-0m300 (z32 tt vg30dett)
coolant resevior(240sx) - 21721 -35f01

#6 Drift...

Drift...

    I am Napolean Dynamite.... Gosh!!!

  • Veterans
  • 1,251 posts

Posted 13 April 2004 - 09:05 AM

SER Sr20 rocker arms - 13257-53J03
Nismo Rocker Arm Stoppers - 13220-RR450
s14 Sr20det waterpump - 21010-65F26
s13 91-94 Hose & Tube Ass. (high pressure PS line) - 49720 - 53F00
(pump to rack, hardline included)
Nismo s14 LH steering rack bushing - 54445-RS540, also same as R32, R33
(see Mazdog's post for the others)
nismo motor/tranny mounts
Ca18de/t
RH - 11210-RS520
LH - 11220-RS520
tranny - 11320-RS541
Sr20de/t
RH - 11210-RS540
LH - 11220-RS540
tranny - 11320-RS541
i do not know why CA and SR are different, so dont ask...
Nismo power brace system 2 - s13 - 54480-RSS30
s14 - 54480-RSS51
Nismo slave cylinder - 30620-RS520
Nismo clutch line SR- 46211-RSS40
CA- 46211-RS520
Nismo thermostat - 21200-RS420
Nismo Radiator cap - 21430-RS012

I have the Nismo Catalog, so I have alot of part numbers...let me know if you want any info on any NISMO part...headgasket, RB timing belt, sparkplugs, clutches, and if your hardcore NISMO exhaust and 6spd Tranny!

Edited by Drift..., 14 April 2004 - 08:38 AM.


#7 phoenixR34

phoenixR34

    Ok dudes, let's walk this sucker

  • Veterans
  • 4,805 posts

Posted 13 April 2004 - 09:13 AM

So don't you need to know the manufacturer for some of these part numbers? ex. Part # "F58B76" P/S Belt, doesn't do much good if you don't know where to buy it, what company it's made by etc. Can you just walk into NAPA and say I need F58B76, or is it Checker, Pep Boys, Autozone, Dealer etc?

Useful information:

Nissan Motorsports
NISMO 2-Way LSD - 240SX 89-98: 38420-RS660

#8 tito

tito

    S14 SE Alloys

  • Veterans
  • 553 posts

Posted 13 April 2004 - 10:47 AM

no, most places can crossreference the numbers without a manufacturer

#9 Drift...

Drift...

    I am Napolean Dynamite.... Gosh!!!

  • Veterans
  • 1,251 posts

Posted 14 April 2004 - 09:13 AM

are we going to create a master database for 240sx part numbers? or just keep this thread?

#10 Anger

Anger

    drunk bitch

  • Veterans
  • 621 posts

Posted 25 April 2004 - 07:40 PM

dont have any part #'s but

ka24de powersteering pump will fit in sr ps bracket

#11 mazdog

mazdog

    have you no logic?

  • Veterans
  • 1,994 posts

Posted 08 May 2004 - 10:24 AM

got a couple more #'s

-SR Rear Main Seal (this is the newest #, last one was updated)- 12279-AD205
-SR Timing Chain Tensioner Gasket- 13029-2J200
-SR Rocker Arm Guides (that little pice i found swimming in my block)- 13218-53J00
-SR Thrust bearing/washer (you need 2) - 12280-60J00
-SR Crank bearings - 12207-60J0x (replace "x" with correct grade number per FSM)

#12 george

george

    2 things you never lift: your car and the throttle

  • Super Moderator(Mod)
  • 7,967 posts

Posted 07 October 2004 - 01:19 AM

i know most oil filters are easy to find numbers for. but i know of cases where people put wrong ones on and they blow off.....not good. anyway here are part numbers for the s13 and s14 sr filters in different brands.

s13:
mobil one = m103 $9.99-10.99
K&N = HP 1003 $12.99
fram = Ph4386 $3.99
stp = S4967 $3.49

cross refference vehicle is 91 sentra w2.0l(sr20de) engine.

s14:
mobil one = m108 $9.99-10.99
bosch = 3300 $4.99 - 5.99
fram = Ph6607 $3.99
stp = S6607 $3.49

cross refference vehicle - 96 sentra w/2.0l (sr20de) engine.

also there is a difference with the s13 blacktops for those that dont know. the 94-96 use the s13 filters while the 97-98 blacktops used the s14 filters. i dont really know off the top of my head how you can tell(besides what ecu came with the engine) the years but make sure you get it right.

i run the mobil one everytime. its alot cheaper than a new engine and is one of the best(if not the best) commerciallly available filter.

also i believe Intense has some Power Enterprise for slightly more than the mobil one filter. ^_^

#13 JiinKz

JiinKz

    fuck you.

  • Veterans
  • 4,692 posts

Posted 07 October 2004 - 01:32 AM

i found out tonight that the filters are different. i was using the same filter i used for my 97 blacktop on my redtop and...whoops. 75mph and the warning light on the gauge comes on...bye bye oil...luckilly i shut off the car as soon as i saw the light and yeah...

#14 champa

champa

    "The Smoker"

  • Valhalla
  • 8,363 posts

Posted 07 October 2004 - 07:28 AM

i found out tonight that the filters are different. i was using the same filter i used for my 97 blacktop on my redtop and...whoops. 75mph and the warning light on the gauge comes on...bye bye oil...luckilly i shut off the car as soon as i saw the light and yeah...

what did you use on your 97 blacktop?

#15 JiinKz

JiinKz

    fuck you.

  • Veterans
  • 4,692 posts

Posted 07 October 2004 - 11:50 AM

the fram 6607 or stp 6607




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users